PowerSDR KE9NS v2.8

this was my Tuner in my old Flex 5000 which has always worked without any problems from day one
lou

anyone interested in setting up Power Sdr with the Contest DXlog program to work in RTTY mode.

follow the attached link

https://dxlog.net/sw/#files%2Futilities

strange behavior of CW skimmer with PowerRX2. the anomalous behavior that I encounter for the first time during the split is the following: if you enable PowerRX2 to find the correspondent's 599 it seems that this does not happen. example: if I position myself in split at 14.020 and the DX station t...

Tnx Darrin.
but how can I upload the PDF file to the Forum platform and in which section should I insert it?
if I use Attachements I can't find the PDF file on my PC

versions published on the KE9NS site will not affect after version 2.7.2 it is clearly written

if you want to use that DOC file for POWER SDR community on your web page you decide. Obviously I take responsibility for what I wrote

Hi Darrin I don't know what to tell you about your setup. I set everything up differently. i use for RTTY mode, MMTTY or MMVari. what I did, I set in both two programs in Radio Command "Frequency Offset" Off. So Power sdr via Cat sends the same frequency as the vfo to the Rtty program and ...

Let's eliminate the Contest/Log program for a moment. I followed your instructions to the letter. but unfortunately something is not right for me 1) Click tune/Filter Offsets: DIGU (Hz) DIGL (Hz) both 2125 Apply. 2) CAT Control: RTTY Offset: Enable Offsets both A and B below DIGL 2125 - DIGU 2125 Ap...

i think
it would be enough to create
and keep it set through the profile setting.

if I enable rtty offset (enable offset VFO A and B) the MMVARI program reads me 2 khz down, while if I disable it it reads the same frequency as power sdr. than If I/Q is active in setup-audio-Vac1-Output to vac, mmvari or mmtty does not work normally. clearly if I want to use cwskimmer I have to re...

I had to enable VAC for reception.
now I only have a problem in DIGL when I go to TX the transmission moves 2.1 khz below the frequency I read on powersdr. example I am at 28.105 they receive me at 28.102.900

I think I was able to get power sdr working with MMTTY thanks to this video



but I don't listen to rtty audio in tx where setting

Hi Darrin as always
if you can give me the power sdr and mmtty settings without log (Contest). If I can do this operation I think I can also configure the contest log to automatically insert the worked calls
I use vspmng and Vb audio

hi I hope someone uses Dxlog. Who could help me with a user guide to set up PowerSdr (Flex3000) + Dxlog (contest sw) and setup mmtty? I would like to undertake this new modality. I'm trying and trying but I can't get it to work in both tx and rx. the only thing that works is reading the powersdr fre...

1) CTRL + SHIFT + D
2) Low level hardware tab
Select the TURF you want on the screen.

Darrin solved everything apparently without understanding.
I have flagged Disable windows animation. but what does this have to do with decoding?

was setted 1000, adpiteve flagged

where are these functions 1500 decoder and Adaptive is active in cwskimmer?