Page 1 of 1
using a lesozoh headset with flex 1500
Posted: Wed Sep 30, 2020 9:18 pm
by KD8PYY
flexradiophones.jpg
I have this setup with the correct adaptor for the flex 1500. the 2 wires y ing off 1 black 1 red ? what's the proper hook up and I'm using a foot switch , it keys the flex , but no audio?? I new, first time with a Flex 1500
Txs
KD8PYY
Jack
Re: using a lesozoh headset with flex 1500
Posted: Wed Sep 30, 2020 10:34 pm
by ke9ns
If you were trying to send an image, send it again.
Darrin
ke9ns
Re: using a lesozoh headset with flex 1500
Posted: Thu Oct 01, 2020 11:10 am
by KD8PYY
Sent you an email to your email address, for some reason it wouldn't attach here??
Jack
Re: using a lesozoh headset with flex 1500
Posted: Thu Oct 01, 2020 3:22 pm
by ke9ns
So you have some sort of adapter to plug the TRS connector of your Headset MIC into the RJ45 connector of the Flex-1500?
Or are you using the Headset plugged into your PC and want to connect your PC spkr and mic to the Flex-1500?
Darrin
Re: using a lesozoh headset with flex 1500
Posted: Thu Oct 01, 2020 4:01 pm
by KD8PYY
sent pic again to email. 2 of them
Re: using a lesozoh headset with flex 1500
Posted: Thu Oct 01, 2020 9:31 pm
by ke9ns
I am assuming your headset is for a PC (i.e. gamers headset)?
I am assuming your headset has 2 TRS cables (1 for the Headphones, 1 for the Mic)?
I would think the Headphone plugs directly into the Flex-1500, and the MIC TRS probably needs voltage (i.e. Electret mic)?
If that is the case, then the Ring maybe set to require +5v (which is pin 3 of the RJ-45 Flex-1500 connector), the Tip would go to pin 5, the Sleeve would go to pin 4. But I dont know the Headset?
Darrin
ke9ns