AF control not working

Installation questions, Setup, and general information not covered in the other sub-forums
Post Reply
wc4r
Posts: 6
Joined: Sat Sep 11, 2021 12:25 pm
Location: Williamsburg VA
Contact:

AF control not working

Post by wc4r »

So, I had to reinstall from scratch on a new PC, firewire card, etc.(Win 11 Pro).
Everything is back to my normal operation again except for the AF slider control. I have VAC1 enabled but the AF slider no longer effect the fixed level audio for my speakers. In the previous set up it worked that way.
I've tried many settings and read posts but now I'm posting to get help here from the PowerSDR experts! ;)
TNX, Joe
User avatar
ke9ns
Site Admin
Posts: 515
Joined: Mon Nov 05, 2018 9:38 am
Location: Illinois, North West Suburbs
Contact:

Re: AF control not working

Post by ke9ns »

As far as I can Remember VAC1 never allowed the AF to control its volume level
But you can use the RX-M slider to adjust the volume (its just below the SR button).

VAC2 does allow use of the AF slider. That's Why I modified the code to allow using VAC2 even if you don't have the 2nd receiver option.
I use VAC2 for listening and VAC1 for digital modes.

Darrin
Creator of PowerSDR KE9NS v2.8, based on the Flex Radio PowerSDR v2.7.2 software.
Flex-5000, LDMOS and Titan Amps, G5RV, and Mosley TA-33 Junior
Post Reply