Search found 474 matches
- Wed Feb 14, 2024 9:35 am
- Forum: General information
- Topic: 5000a 2 carriers on tune
- Replies: 6
- Views: 985
Re: 5000a 2 carriers on tune
Is it just on 80m or all bands? I would probably cycle power to the radio and PC, then see if it still does it. If its still present, then do a setup->factory defaults (this will save your current database to your desktop automatically) If it still does this when running factory defaults, I would pr...
- Mon Feb 12, 2024 1:56 pm
- Forum: PowerSDR KE9NS v2.8
- Topic: d-star
- Replies: 1
- Views: 382
Re: d-star
The Panafall display of the Flex-5000 is not effected by the mode your running whatsoever. Literally the only thing that can effect the display is the NB feature... if a very very strong signal is anywhere within the 192khz sample range, it can cause the Noise blanker to display artifacts on clean s...
- Mon Feb 05, 2024 9:49 am
- Forum: PowerSDR KE9NS v2.8
- Topic: setting up PowerSDR with a Flex 5000a For 100 Watt AM Mode
- Replies: 1
- Views: 460
Re: setting up PowerSDR with a Flex 5000a For 100 Watt AM Mode
Mitch, With the Flex-5000, the SSB and AM definitely have different TX profiles for setup and EQ. Yes keep the carrier at 25watts max (assuming 100 watt output). When I run my Titan amp, I keep my carrier at around 375 watts I have a section on my webpage ke9ns.com/flexpage.html. Click on the eSSB/A...
- Thu Feb 01, 2024 8:42 am
- Forum: PowerSDR KE9NS v2.8
- Topic: psst... Topic is solved
- Replies: 2
- Views: 1449
Re: psst... Topic is solved
upated thanks
- Wed Jan 31, 2024 10:11 am
- Forum: FireWire (1394)
- Topic: Firewire Win11 PFN LIST
- Replies: 26
- Views: 23201
Re: Firewire Win11 PFN LIST
Just for the Full installer. Not even sure you can run a Win7 compatibility mode for the incremental, since its just file replacement. When I compile PowerSDR code its on a Win11 x64 machine, but I dont work with the FireWire software or its drivers (They were developed under Win7) Win 7 compatibili...
- Wed Jan 17, 2024 10:30 am
- Forum: PowerSDR KE9NS v2.8
- Topic: Something seems screwed up here.. Topic is solved
- Replies: 2
- Views: 1510
Re: Something seems screwed up here.. Topic is solved
If the backup was made using my ke9ns v2.8.0, it should import OK. There are a lot of settings in PowerSDR that could get messed up and make it difficult to remember how they were all set (when it was working the way you liked it). If there is any corruption in your current database or backup, its v...
- Mon Jan 15, 2024 2:42 pm
- Forum: General information
- Topic: Change from Class A to Class A/B or B
- Replies: 2
- Views: 793
Re: Change from Class A to Class A/B or B
By default all Flex-5000 radios are "Class AB". If you click on the "Hidden Menus" quick link, then the "PA and SWR Calibration" link, then scroll down to Class A and Class AB. It explains how to re-calibrate the BIAS to either A or AB. Its safest to run your Flex-5000 ...
- Mon Jan 08, 2024 9:08 am
- Forum: PowerSDR KE9NS v2.8
- Topic: .289 Ant Select Relay chatter when tuning RX2 Topic is solved
- Replies: 6
- Views: 5716
Re: .289 Ant Select Relay chatter when tuning RX2 Topic is solved
Running the installer in compatibility mode was probably a good idea.
Worst case, is you uninstall, wipe, and start over
Darrin
Worst case, is you uninstall, wipe, and start over
Darrin
- Sun Jan 07, 2024 6:11 pm
- Forum: PowerSDR KE9NS v2.8
- Topic: .289 Ant Select Relay chatter when tuning RX2 Topic is solved
- Replies: 6
- Views: 5716
Re: .289 Ant Select Relay chatter when tuning RX2 Topic is solved
"Expert Mode". I see it now!
I have not used Expert mode in a long time.
Download .290. That should fix the "Expert Mode" and RX2 issue.
Darrin
I have not used Expert mode in a long time.
Download .290. That should fix the "Expert Mode" and RX2 issue.
Darrin
- Sat Jan 06, 2024 9:23 pm
- Forum: PowerSDR KE9NS v2.8
- Topic: .289 Ant Select Relay chatter when tuning RX2 Topic is solved
- Replies: 6
- Views: 5716
Re: .289 Ant Select Relay chatter when tuning RX2 Topic is solved
When I set VFOB as TX and hit either TUN or ATU, I have no issues (using ANT1 or ANT3) at all.
So I must not understand what your saying or the settings your using?
Darrin
So I must not understand what your saying or the settings your using?
Darrin
- Sat Dec 30, 2023 5:36 pm
- Forum: PowerSDR KE9NS v2.8
- Topic: flex 3000 - AM setup looking
- Replies: 4
- Views: 2021
Re: flex 3000 - AM setup looking
Frank, OK. Technically I never tried it on a 1500 or 3000, I assumed it would be the same, but I might be wrong. I have only had fantastic AM audio reports with my setup and my 5000. Note to Everyone: Make sure your using a Mic with a full audio freq range output. The EQ that is built into PowerSDR ...
- Thu Dec 28, 2023 7:48 pm
- Forum: FireWire (1394)
- Topic: Firewire Win11 PFN LIST
- Replies: 26
- Views: 23201
Re: Firewire Win11 PFN LIST
I looked and I dont have that KB5032007 installed on my Win11 x64 Pro, but I am at ver 21H2 (not 22H2)
I will need to keep that KB in mind.
Thanks
Darrin
I will need to keep that KB in mind.
Thanks
Darrin
- Thu Dec 28, 2023 7:25 pm
- Forum: PowerSDR KE9NS v2.8
- Topic: flex 3000 - AM setup looking
- Replies: 4
- Views: 2021
Re: flex 3000 - AM setup looking
AM mode definitely has a totally different setup from SSB in PowerSDR. I have a great AM setup for TX on my website. Go to ke9ns.com/flexpage.html Click on the "eSSB/AM" link on the left side of the screen. It has all the PowerSDR settings needed for fantastic AM audio. NOTE: Even though I...
- Fri Dec 22, 2023 1:53 pm
- Forum: FireWire (1394)
- Topic: Firewire Win11 PFN LIST
- Replies: 26
- Views: 23201
Re: Firewire Win11 PFN LIST
Someone also said to make sure control panel Power Options was set to High performance and to set "Core Parking. Meaning that we dont want the OS to shut down CPU's to save on power consumption while running PowerSDR. I believe I put that info on my webpage. I know that some BIOS settings allow...
- Wed Dec 20, 2023 11:47 am
- Forum: FireWire (1394)
- Topic: Firewire Win11 PFN LIST
- Replies: 26
- Views: 23201
Re: Firewire Win11 PFN LIST
Yup.. Thanks I seems like the PFN faults started to occur after Microsoft started to make "Security" updates to FireWire drivers. Putting limitations on to the original specs due to security concerns. Newer FireWire chips seem to work better along with making sure you dont have an IRQ conf...
- Fri Dec 15, 2023 8:25 am
- Forum: General information
- Topic: Looking for vu5k
- Replies: 5
- Views: 9776
Re: Looking for vu5k
The only way I know of getting a VU5K module, would be to contact Toby (toby@troyradio.net). He is the authorized legacy service center for Flex. BUT at this point in time, I believe he uses the VU5K spares he has for repairing VU5K radios, so I am not sure he would sell you a spare? Also when you g...
- Mon Dec 11, 2023 10:24 pm
- Forum: PowerSDR KE9NS v2.8
- Topic: Flex-3000 "vertical" - Silly question
- Replies: 2
- Views: 8497
Re: Flex-3000 "vertical" - Silly question
I do have photos of the inside of the flex-3000 in the manuals section of my webpage (towards the top of the webpage). The only reason not to stand up the unit would be for proper venting during Transmit. The case has vent holes on the sides, so I think you would want to make sure you dont block the...
- Thu Dec 07, 2023 11:50 am
- Forum: FireWire (1394)
- Topic: Firewire connectivity issues
- Replies: 4
- Views: 6983
Re: Firewire connectivity issues
The Flex-5000 does not need a sound card at all BUT... PowerSDR needs at least 1 PC Playback device (like Headset or speakers) and 1 Recording device (like a mic). You technically dont need a sound card (if your not going to use VAC1/2), just a USB Headset with mic (i.e. a cheap walmart logitech usb...
- Wed Dec 06, 2023 8:55 am
- Forum: PowerSDR KE9NS v2.8
- Topic: PAN Mode
- Replies: 4
- Views: 6426
Re: PAN Mode
I fixed the Center button when using PAN. I also now turn off PAN if you try and Zoom out beyond 0.6x in 192khz sample rate Because the PAN feature use "I.F. shift" to move the bandpass around, IQ VAC will move as you move around. PC programs that use IQ audio need to know the I.F. Shift, ...
- Wed Dec 06, 2023 8:40 am
- Forum: FireWire (1394)
- Topic: Firewire connectivity issues
- Replies: 4
- Views: 6983
Re: Firewire connectivity issues
The 755 is just a 2 core PC. Definitely not enough power for my version of PowerSDR. Even 4 cores is barely enough. PowerSDR is a 32bit application (there are a few DLLs that I dont have source code for, so we are stuck at 32bit) But its best if you install PowerSDR on a Win10 or Win11 x64 OS (you n...