Unhandled exception in v2.8.0.306 (Flex 5000)
Posted: Fri Nov 29, 2024 11:02 pm
Darrin,
I encountered a problem when I selected the "SPEC" mode. Both RX1 and RX2 displays turned all white with a red X across the screen with a error message indicating "an unhandled exception has occurred in the application. Index was outside the bounds of the array."
I quit the application and then restarted but the error message persisted. I powered down the Flex 5000 and then restarted the radio and the application but the error still persisted. After quitting the application and restarting several more times the error cleared.
Everything seems to be back up and working correctly although I didn't try selecting the "SPEC" button again to see if the problem would reoccur.
Is there anything I did wrong to generate this error or anything I can do to prevent future occurrence if I try using the SPEC function?
Thanks very much!
Jerry - WB0DEK
I encountered a problem when I selected the "SPEC" mode. Both RX1 and RX2 displays turned all white with a red X across the screen with a error message indicating "an unhandled exception has occurred in the application. Index was outside the bounds of the array."
I quit the application and then restarted but the error message persisted. I powered down the Flex 5000 and then restarted the radio and the application but the error still persisted. After quitting the application and restarting several more times the error cleared.
Everything seems to be back up and working correctly although I didn't try selecting the "SPEC" button again to see if the problem would reoccur.
Is there anything I did wrong to generate this error or anything I can do to prevent future occurrence if I try using the SPEC function?
Thanks very much!
Jerry - WB0DEK