Flex control Knob

[IK8HCG]

I recently purchased the FlexControl Tuning VFO. everything ok, it works and the 3 available keys have been programmed. I notice however with the two receivers open the flexcontrol on the main vfo works regularly, while when I want to act on VFO B the tuning synchronization is not regular.
lou IK8HCG

[G7DAZ]

Aaaahhh i'm glad you posted that...my Hercules MP3 E2 controller is doing exactly the same thing on VFO 2 ...i assumed it was my fault or my PC and just lived with it...the fault is :- if you spin the knob a bit fast then the onscreen vfo locks up/delays for a while, eventually after a period of time it catches up and all is well.....fwiw vfo 1 is fine regardless of how fast/slow the knob is spun.

[IK8HCG]

if you spin the knob a bit fast then the onscreen vfo locks up/delays for a while, eventually after a period of time it catches up and all is well.....fwiw vfo 1 is fine regardless of how fast/slow the knob is spun.

Right, is what happens to me

[ke9ns]

I modified my PowerMate knob so I can use it on VFOB, and the it spins fine on both VFOA and B in .249
But I dont have a FlexControl Knob to test, but it appears to use similar code as my PowerMate knob.

Darrin

[IK8HCG]

Hello everyone
I'm checking some anomalies with the flex control and bring them back to the forum especially to Darrin to always improve its function and potential.
I noticed that if no function is attached to aux1 aux2 aux3 (none) but we only give the function to Knob press actions (Tune VFO A sub) useful in split operation, the flex control does not work.
can anyone check?

[IK8HCG]

hi to all
is there anyone who uses the Flex control with flex 5000?
I notice that the tunning fluids are not normal. in VFO A I notice that when I turn the knob the panadapter wave freezes while in VFO B the synchronization is not linear with the rotation of the knob

[IK8HCG]

the flexcontrol on the VFO B is unusable.
no one has checked?