I have links on my webpage (left side) for "Virtual audio" and "Virtual Serial"
These have been recently updated to the exact setup I use with WSJT-X, using only free VspMgr (virtual COM port pairs), and free Voicemeeter Banana (Virtual audio cables). NOTE: I no longer need to use DDUtil as a COM/CAT multiplexer as that function is now in PowerSDR v2.8.0.
You can use an almost exact same setup for most other PC digital programs (like FLDIGI, or FreeDV).
I strongly advise not to use real audio cables between the Flex and your PC. Less cables means less chance of a ground loop or RFI getting at your audio from those extra cables.
Example WSJT-X setup for PowerSDR
-
ke9ns
- Site Admin
- Posts: 524
- Joined: Mon Nov 05, 2018 9:38 am
- Location: Illinois, North West Suburbs
- Contact:
Example WSJT-X setup for PowerSDR
Creator of PowerSDR KE9NS v2.8, based on the Flex Radio PowerSDR v2.7.2 software.
Flex-5000, LDMOS and Titan Amps, G5RV, and Mosley TA-33 Junior
Flex-5000, LDMOS and Titan Amps, G5RV, and Mosley TA-33 Junior