I'm using Power SDR 2.8 in conjunction with Ham Radio Deluxe and WJSTX.
I use the VAC for the audio streams and I've somehow lost my TX audio.
If I use the Tune button in WJSTX, my radio keys but I have no audio and therefore no power out.
I can see the audio on the meter in my VAC control panel but somehow it's still not making it to POWER SDR.
I've checked and rechecked my audio configuration and it's worth noting that it was working before and it just mysteriously quit.
Any ideas?
73,
Michael, W4HIJ
Loss of TX audio between Power SDR and WJSTX
-
ke9ns
- Site Admin
- Posts: 624
- Joined: Mon Nov 05, 2018 9:38 am
- Location: Illinois, North West Suburbs
- Contact:
Re: Loss of TX audio between Power SDR and WJSTX
Take a photo of the VAC1 screen, take a photo of the audio in/out in wsjt-x
Creator of PowerSDR KE9NS v2.8, based on the Flex Radio PowerSDR v2.7.2 software.
Flex-5000, LDMOS and Titan Amps, G5RV, and Mosley TA-33 Junior
Flex-5000, LDMOS and Titan Amps, G5RV, and Mosley TA-33 Junior
Re: Loss of TX audio between Power SDR and WJSTX
Problem solved by resetting the database.
Probably the first thing I should have tried.
73,
Michael, W4HIJ
Probably the first thing I should have tried.
73,
Michael, W4HIJ