using a lesozoh headset with flex 1500

[KD8PYY]

flexradiophones.jpg

I have this setup with the correct adaptor for the flex 1500. the 2 wires y ing off 1 black 1 red ? what's the proper hook up and I'm using a foot switch , it keys the flex , but no audio?? I new, first time with a Flex 1500

Txs

KD8PYY
Jack

[ke9ns]

If you were trying to send an image, send it again.

Darrin
ke9ns

[KD8PYY]

Sent you an email to your email address, for some reason it wouldn't attach here??

Jack

[ke9ns]

So you have some sort of adapter to plug the TRS connector of your Headset MIC into the RJ45 connector of the Flex-1500?

Or are you using the Headset plugged into your PC and want to connect your PC spkr and mic to the Flex-1500?

Darrin

[KD8PYY]

sent pic again to email. 2 of them

[ke9ns]

I am assuming your headset is for a PC (i.e. gamers headset)?
I am assuming your headset has 2 TRS cables (1 for the Headphones, 1 for the Mic)?
I would think the Headphone plugs directly into the Flex-1500, and the MIC TRS probably needs voltage (i.e. Electret mic)?
If that is the case, then the Ring maybe set to require +5v (which is pin 3 of the RJ-45 Flex-1500 connector), the Tip would go to pin 5, the Sleeve would go to pin 4. But I dont know the Headset?

Darrin
ke9ns